DRAFT
TM 5-4210-249-13&P-2
0131
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
TFFT03686
NOTE
For Step 60, it will be necessary to check both wires 2827 (black) at POWERED
EQUIPMENT RACK LIFT switch. Both wires carry same amperage but are used in
reversed voltage at switch to allow equipment ladder rack to raise and lower.
Step 60.
Disconnect crew cab wire harness ladder rack control wire harness connector. Check
for continuity across ladder rack control wire harness wire 2827 (black) from crew cab
wire harness ladder rack control wire harness connector, terminal A to POWERED
EQUIPMENT RACK LIFT switch, connector and connector.
If there is no continuity, repair wire 2827 in ladder rack control wire harness
if repairable (TM 9-2320-325-14&P), or replace ladder rack control wire
harness (WP 0449).
0131-49