DRAFT
TM 5-4210-249-13&P-2
0131
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
TFFT03551
Step 4.
Turn battery disconnect switch to ON position (WP 0007). Check for 22 to 28 VDC
between pump house power distribution wire harness wire 1138 (red) at circuit
breaker P7, terminal and a known good ground.
If 22 to 28 VDC are not present, replace pump house power distribution wire
harness and block (WP 0457).
TFFT03552
Step 5.
Turn battery disconnect switch to OFF position (WP 0007). Install circuit breaker P7
(WP 0398). Remove cab instrument panel A (WP 0311). Remove fuse FS 8
If there is no continuity, replace fuse FS 8 (WP 0401).
0131-4