DRAFT
TM 5-4210-249-13&P-2
0130
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
TFFT02984
Step 65.
Remove skid plate grille (WP 0550). Disconnect main wire harness main 3 connector.
With rear compartment doors open and with a lead test set, check for continuity
between wire 1609 (gray) at main wire harness main 3 connector, terminal 17 and a
known good ground.
a.
If there is continuity, repair wire 1609 in cab power distribution wire
harness if repairable (TM 9-2320-325-14&P), or replace cab power
distribution wire harness and block (WP 0441).
b.
If there is no continuity, repair wire 1609 in main wire harness if
repairable (TM 9-2320-325-14&P), or replace main wire
harness (WP 0455).
0130-45
