DRAFT
TM 5-4210-249-13&P-1
0104
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
TFFT03377
WARNING
ICON 66
If air lines are under pressure when they are disconnected, they can whip around
and cause injury to personnel. Caution should be exercised when disconnecting
air line fittings.
Air lines may be under pressure when control valve is operated. If under pressure
and air lines are disconnected, air lines may whip around and cause injury to
personnel. Caution should be exercised when operating control valve with air lines
disconnected.
NOTE
Air pressure is checked by disconnecting air lines at bumper turret valve and observing air
pressure escaping from air lines, when bumper turret valve is activated. Air will escape
from blue air line when bumper turret control discharge switch is pressed, and escape
from red air line when bumper turret control discharge switch is released. System air
pressure may drop below 85 psi (586 kPa) during this procedure.
Step 4.
Release bumper turret control discharge switch (WP 0004). Disconnect air lines at
bumper turret valve. While an assistant pushes bumper turret control discharge switch,
check if air pressure is present at bumper turret valve.
If there is air pressure, replace bumper turret valve (WP 0482).
0104-5
