DRAFT
TM 5-4210-249-13&P-1
0097
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
TFFT02709A
Step 11.
Release bumper turret control agent discharge button (WP 0004). Reconnect air line at
bumper turret foam B multi-metering valve cylinder. Disconnect valve control wire
harness bumper turret foam B foam system flow control manifold connector. While an
assistant pushes bumper turret discharge button (WP 0004). With a test lead set,
check for 22 to 28 VDC between valve control wire harness wire 2837 (gray) at bumper
turret foam B foam system flow control manifold connector, terminal 1 and a known
good ground.
If 22 to 28 VDC are not present, repair wire 2837 in valve control wire
harness if repairable (TM 9-2320-325-14&P), or replace valve control wire
harness (WP 0463).
0097-10