TM 5-4210-233-14&P-2
6-78. LADDER ASSEMBLY - Continued
(5) At rear and front end of lower mid-section, install cables on sheaves (4) and mount with retaining
rings (5), flatwashers (5A) and pins (6). Install retaining rings (7) and clevis pins (8) on dead end
lugs (9) at rear and front ends of lower mid section.
(6) Install vertical wear pads (10) at front of upper mid-section with bolts (11), lockwashers (12) and
flatwashers (12A). Tighten jam nuts (13) and adjusting screws (14). Horizontal wear pads (10A) fit
into recesses.
6-479