TM 5-4210-233-14&P-2
6-78. LADDER ASSEMBLY- Continued
(2) Route or verify routing of electrical cables.
(3) Assemble/install two traveling blocks (1) by pressing new bushings (2) in sheaves (3).
(4) install sleeve pins (4) through bottom plate (5) using screws (6).
(5) Assembly sheaves (3), center plate (7), cylinder block connectors (8) and top plate (9).
(6) Secure traveling block assembly (1) together with tension cables with screws (11), flatwashers (12)
and nuts (13).
(7) Install new wear pads (14) with screws (15).
6-473