TM 5-4210-233-14&P-2
6-29. MAIN BEARINGS AND CRANKSHAFT - Con tlnued
(36) Install two bearing caps (10 and 11).
(37) Do steps (7) to (12).
(38) Do steps (19) and (20) but disregard note
between steps. If crankshaft runout is still too
high replace crankshaft (2).
(39) Do steps (21) to (27).
b.
Disassembly.
(1) Remove screw (1) and spacer (2) from crankshaft (3).
NOTE
Following steps will be done only to remove
loose or broken plugs, studs, and dowels.
Steps (2) through (4) are not necessary for
ordinary cleaning and inspection.
(2) Remove four studs (4 and 5) from No. 1 and
No. 2 bearing caps (6).
(3) Remove four dowel pins (7) from rear bearing
cap (8).
(4) Remove four plugs (9) from crankshaft.
6-149