|
| |
TM 5-4210-233-14&P-1
5-45. MUFFLER
This task covers:
a
Removal
c.
Follow-on Maintenance
b
Installation
TOOLS REQUIRED:
EQUIPMENT CONDITION
Tool Kit, General Mechanics, Automotive
Main Engine Shutdown (see para 2-12.)
(Appendix B, Section III, Item 1)
APU Shutdown (see para 2-16.)
Batteries Disconnected (see para 4-114.)
Spark Arrestor and Tail Pipe Removed (see para
5-46.)
a.
Removal.
WARNING
Exhaust pipe can be hot enough to cause severe burns. Allow
exhaust system to cool before servicing.
(1) Remove four hex nuts (1) and four flat
washers (2).
(2) Remove two clamps (3 and 4) and grind off
any tac-welds.
(3) Remove hex nut (5), lockwasher (6), flat
washer (7) and bolt (8) from strap (9).
(4) Remove muffler (1 0) with and strap (9)
from exhaust pipe (11).
(5) Remove muffler (10) from exhaust tube (12).
b.
Installation.
(1) Install muffler (10) into exhaust tube (12).
(2) Slide exhaust pipe (11) onto muffler (10).
(3) Secure strap (9) with bolt (8), flat washer (7), lockwasher (6) and hex nut (5).
(4) Install and secure clamps (3 and 4) with four flat washers (2) and four hex nuts (1).
c.
Follow-on Maintenance.
(1) Install spark arrestor and tail pipe (see para 5-46).
(2) Connect batteries (see para 4-114).
5-325
|
