|
| |
TM 5-4210-233-14&P-1
5-43. FORWARD TANDEM AXLE AND DRIVE UNIT-Continued
(58)
Check that matchmarks on rear gear (77) and
helical gear (41) are aligned. Install input shaft
assembly in carrier.
(59)
Install the deflector (37) on input yoke (23) and
install input yoke (23) on input shaft (25). Press
input yoke (23) on splines of input shaft (25).
Install nut (24) on input shaft (25). Do not tighten
nut (24) at this time.
(60)
Using a hoist, lift input shaft assembly (25) into
position in differential carrier bearing (5).
Check matchmarks on rear gear (77) and
helical gear (41) to be sure they are aligned and
lower input shaft assembly (29) into position.
5-316
|
