|
| |
TM 5-4210-233-14&P-1
5-43. FORWARD TANDEM AXLE AND DRIVE UNIT-Continued
(55)
Install the interaxle differential (40) and secure
with new retaining ring (39). Heads of screws on
interaxle differential must be towards helical
gear (41).
WARNING
Serious injury could occur if heavy
equipment is moved/lifted without
sufficient personnel to do the job.
Use
proper
physical
lifting
procedures or use a suitable lifting
device or dolly. Wear safety shoes,
gloves and other suitable protective
clothing. Area should be clear of
other personnel. Serious injury or
death can result from falling objects.
(56)
Using a hoist, move differential (5) carrier
housing to press and install bearing cup (51)
in differential carrier housing (5). Install
bearing cone (50) on shaft of side gear (52)
and install side gear (52) in differential carrier
housing (5).
(57)
Install the differential carrier housing (5) in the repair stand with the differential ring gear (19)
towards the floor. Make sure the clutch collar (37) is installed with teeth in collar towards input yoke
(23). Install clutch collar (37) on the shift fork (47) so that groove in clutch collar (37) engages tabs
on shift fork (47).
5-315
|
