|
| |
TM 5-4210-233-14&P-1
5-22.
BLOWER REPAIR - Continued
(23)
Position two flat bearing retainers (14) on rear end ptate (10)
and install six screws (15) in retainers. Tighten six screws to
10 Ib-ft (14 N•m).
(24)
Install two roller bearing collars (16) to both shafts (4)
at front end plate (6) with bearing installer tool.
(25)
Apply lubricating oil (Item 10, Appendix E) to two
roller bearings (17).
(26)
Install roller bearings (17), over rotor shafts (4)
with bearing installer tool.
NOTE
Flanges on bearing retainers face front end plate.
(27)
Install two flanged bearing retainers (18) with six
screws (19) on front end plate (6). Tighten screws
to 10 Ib-ft (14 N•m).
5-134
|
