|
| |
TM 5-4210-233-14&P-1
5-16. FUEL PUMP-Continued
(10)
Apply coating of adhesive-sealant
(Item 35, Appendix E) to mating
surface of cover (1 2). Install cover on
housing (2).
(11)
Install eight lockwashers (13) and
screws (14). Tighten screws evenly.
(12)
Coat threads of nipple (15), coupling
(16), elbow (17), and elbow (18) with
pipe thread sealing compound (Item 2,
Appendix E) and install on pump (19).
(13)
Remove pump (19) from fuel pump
holder.
(14)
Install fork (20) in pump (19).
e.
Installation.
(1)
Apply grease (Item 1, Appendix E) to
new gasket (1).
(2)
Install gasket (1) to governor housing
(2).
(3)
Aline fork (3) with blower shaft (4) and
install fuel pump (5).
5-94
|
