|
| |
TM 5-4210-233-14&P-1
5-15. OIL COOLER
This task covers:
a.
Removal
b.
Installation
TOOLS REQUIRED
EQUIPMENT CONDITION
Tool Kit, General Mechanics, Automotive
Main Engine Shutdown (see para 2-12.)
(Appendix B, Section III, Item 1)
APU Shutdown (see para 2-16.)
Batteries Disconnected (see para 4-114.)
Shop Equipment, Automotive
Spring Shackle and Pivot Removed
Maintenance and Repair
(see para 5-41.)
(Appendix B, Section III, Item 4)
MATERIALS/PARTS REQUIRED
Gaskets and Seal (Figure 82, Appendix F)
a.
Removal
(1)
Drain engine cooling system by opening draincock at bottom of oil cooler housing.
(2)
Loosen clamps (1) and slide hose (2) down on the water inlet elbow. Remove two clamps (3) and
hoses (4).
5-87
|
