|
| |
TM 5-4210-233-14&P-1
5-14. STARTER REPAIR AND TESTING-Continued
(19)
Install washer (39) on armature shaft
(40).
(20)
Install armature (41) into end cap (25).
(21)
Hold six springs (12) and install six
brushes (42) with six screws (43).
(22)
Align hole in bushing (44) with hole in
bushing boss and press bushing into
lever housing (45).
(23)
Put four drops of epoxy adhesive (Item
35, Appendix E) on back of non-
metallic washer (46) and
install in lever housing (45).
5-81
|
