|
| |
TM 5-4210-233-14&P-1
5-14. STARTER REPAIR AND TESTING - Continued
(14)
Install felt wick (27) in end cap (25) and
fill with oil.
(15)
Install cup plug (28).
(16)
Install paper gasket (29), two insulating
washers (30), and rubber bushing (31)
on ground terminal (32) of brush holder
(33).
(17)
Install brush holder (33) on end cap
(25) with three screws (34).
(18)
Install insulator (35), washer (36),
lockwasher (37), and nut (38) on
ground terminal (32).
5-80
|
