|
| |
TM 5-4210-233-14&P-1
5-14. STARTER REPAIR AND TESTING - Continued
(5)
Test field coil. Place red (+) lead on field terminal stud (12). Place black (-) lead on field frame
(13). Multimeter needle must not move.
(6)
Place red (+) lead on field terminal stud (12). Place black (-) lead on one of field leads (1 4).
Multimeter needle must move.
(7)
Move black (-) lead to other field leads (14). Multimeter needed must move.
(8)
Place red (+) lead on one field lead (14). Put black (-) lead on another field lead. Multimeter
needle must move. Repeat for all leads.
(9)
Replace any defective parts as necessary.
d.
Assembly.
(1)
Install insulator bushing (1) on terminal stud (2).
(2)
Install field coil (3) in field frame (4) and put terminal stud (2) through hole (5).
(3)
Align holes in plate insulator (6) with holes in field frame (4) and install around top of field coil (3).
5-77
|
