|
| |
TM 5-4210-233-14&P-1
4-186. RUN/LOCK SELECTOR VALVE
THIS TASK COVERS:
a.
Removal
d.
Assembly
b.
Disassembly
e.
Installation
c.
Cleaning and Inspection
f.
Follow-on Maintenance
TOOLS REQUIRED
MATERIALS/PARTS REQUIRED
Tool Kit, General Mechanics, Automotive
Cleaning Solvent (Item 3, Appendix E)
(Appendix B, Section IlIl, Item 1)
Cotter Pin (Fig. 177, Appendix F)
Seals (Fig. 177, Appendix F)
Shop Equipment, Automotive
Hydraulic Oil (Item 28, Appendix E)
Maintenance and Repair
(Appendix B, Section III, Item 4)
EQUIPMENT CONDITION
Ladder in Transport Position (see para 2-14.)
Main Engine Shutdown (see para 2-12.)
APU Shutdown (see para 2-16.)
Batteries Disconnected (see para 4-114.)
a.
Removal
(1) Remove cotter pin (1) and clevis pin (2).
Discard cotter pin.
(2) Tag and remove hoses (3).
NOTE
Tag all hose and tube assemblies before disconnecting. Cap or plug
all hose, tube, and fitting openings to prevent entry of foreign matter.
(3) Remove screws (4), washers (5), nuts (6) and horn (7)
(4) Remove selector valve (8) from cabinet.
4-477
|
