|
| |
TM 5-4210-233-14&P-1
4-134. ENGINE STARTING AID
This task covers:
a.
Removal
c.
Follow-on Maintenance
b.
Installation
TOOLS REQUIRED
EQUIPMENT CONDITION
Tool Kit, General Mechanics, Automotive
Main Engine Shutdown (see para 2-12.)
(Appendix B, Section III, Item 1)
APU Shutdown (see para 2-16.)
Batteries Disconnected (see para 4-114.)
Left Side Engine Compartment Door Open
a.
Removal.
(1) Loosen clamp (1).
(2) Unscrew fuel cylinder (2) from fitting (3)
and discard cylinder if empty. Install cap
(4) on fitting (3) to keep dirt out.
(3) To remove bracket (5), remove four screws
(6), flatwashers (7) lockwashers (8) and
nuts (9).
(4) Disconnect tube (10).
(5) Tag and disconnect wires (11).
b.
Installation.
(1) Connect wires (11).
(2) Connect tube (10).
(3) Install bracket (5) to truck with four screws
(6), flatwashers (7), lockwashers (8) and
nuts (9).
(4) Remove cap (4) from fitting (3). Thread
cylinder (2) into fitting (3) until tight.
(5) Tighten clamp (1).
c. Follow-on Maintenance.
(1) Connect batteries (see para 4-114.).
(2) Close left side engine compartment door.
4-395
|
