|
| |
TM 5-4210-233-14&P-1
4-133. ALTERNATOR - Continued
(4) Support alternator (9) and remove nut (10) and washer (11) and screw (12) securing alternator (9) to
bracket (13) on engine.
(5) Lift alternator (9) up and away from engine.
(6) Remove nut (14), washer (15) and screw (16). Remove rod (3) from bracket (8).
(7) Remove nuts (17), rod end (18) and washer(19).
b.
Installation.
(1) Assemble rod (3), rod end (18), nuts (17) and washer(19).
(2) Install rod end (18) on bracket (21) and secure with screw (16), washer (15) and nut (14).
(3) Install alternator (9) in position on mounting bracket (13) and install screw (12) through alternator (9)
and mounting bracket (13). Install nut (10) and washer (11) on screw (12). Do not tighten.
(4) Hold alternator in position and install bracket (8) in position on alternator mounting lug. Install screw
(6), washer (7), nut (4) and washer (5).
(5) Install washer (2) and two nuts (1) on rod (3).
(6) Connect engine wiring harness and wires to alternator.
c.
Follow-on Maintenance.
(1) Install alternator belt (see para 4-135.).
(2) Connect batteries (see para 4-114.).
(3) Close engine compartment covers.
4-394
|
