|
| |
TM 5-4210-233-14&P-1
4-111. WINDSHEILD WIPER MOTOR
This task covers:
a.
Removal
c.
Follow-on Maintenance
b.
Installation
TOOLS REQUIRED:
EQUIPMENT CONDITION
Tool Kit, General Mechanics, Automotive
Main Engine Shutdown (see para 2-12.)
(Appendix B, Section 11I, Item 1)
APU Shutdown (see para 2-16.)
Batteries Disconnected (see para 4-114.)
a.
Removal.
(1) Lift cover (1) to access nut.
(2) Remove nut (2) and washer (3).
(3) Remove wiper arm (4).
(4) Remove cover (5), nut (6), washer (7),and
spacer (8).
(5) Remove screw (9) and washer (10).
(6) Disconnect washer tube (12) from fitting on
front of truck.
(7) Disconnect electrical harness from motor
assembly (11) under dashboard.
(8) Remove windshield wiper motor assembly
(11) from truck.
b.
Installation.
(1) Connect wiring harness to wiper motor
assembly (11).
(2) Align wiper motor in truck and install screw
(9), and washer (10).
(3) Install nylon spacer (8), washer (7), nut (6),
and cover (5
(4) Install wiper arm (4).
(5) Fasten arm in place with nut (2) and
washer (3) and close cover (1).
(6) Connect washer tube (12) to fitting on front
of truck.
c.
Follow-on Maintenance.
(1) Connect batteries (see para 4-114.).
(2) Test operation of windshield wiper motor.
4-360
|
