|
| |
TM 5-4210-233-14&P-1
4-110. WINDSHEILD WASHER RESERVOR
This task covers:
a.
Removal
c.
Follow-on Maintenance
b.
Installation
TOOLS REQUIRED:
EQUIPMENT CONDITION
Tool Kit, General Mechanics, Automotive
Main Engine Shutdown (see para 2-12.)
(Appendix B, Section III, Item 1)
APU Shutdown (see para 2-16.)
Batteries Disconnected (see para 4-114.)
MATERIALS REQUIRED
Washer Fluid (Item 26, Appendix E)
a.
Removal.
(1) Remove wire (1).
(2) Remove four screws (2) and flatwashers (3).
(3) Turn reservoir (4) so pump (5) faces up and
disconnect hose (6).
(4) Drain washer fluid into suitable container.
(5) Remove screws (6), washers (7) and bracket (8) from
truck (if necessary).
b.
Installation.
(1) Install bracket (8) with screws (6) and washers (7).
(2) Install pump (5) in new reservoir (4).
(3) Secure pump reservoir (4) to bracket (8) with four
screws (2) and four flatwashers (3).
(4) Connect hose (6) and wire (1).
(5) Fill reservoir with washer fluid (Item 26, Appendix E).
c.
Follow-on Maintenance.
(1) Connect batteries (see para 4-114)
4-359
|
