|
| |
TM 5-4210-233-14&P-1
4-101. BATTERY SELECTOR SWITCH
This task covers:
a.
Removal
c.
Follow-on Maintenance
b
Installation
TOOLS REQUIRED
EQUIPMENT CONDITION
Tool Kit, General Mechanics, Automotive
Main Engine Shutdown (see para 2-12 .)
(Appendix B, Section ll, Item 1)
APU Shutdown (see para 2-16 .)
Batteries Disconnected (see para 4-114 .)
a.
Removal.
(1) Place wheel chocks under wheels to
(2) Remove four screws (1) and washers (2).
(3) Loosen set screw in knob (3) and remove
knob (3).
(4) Remove nut (4) from parking brake valve
(5) Remove four screws (6), four washers (7),
four lockwashers (8) and four nuts (9).
(6) Remove panel (10).
(7) Tag and remove wires from switch (11).
b.
Installation.
(1) Install wires on switch (11).
(2) Install switch (11) in panel (10) with four
screws (6), four washers (7), four
lockwashers (8) and four nuts (9).
(3) Install parking brake valve (5) in panel (1 0)
with nut (4).
(4) Install knob (3) and tighten set screw.
(5) Install four screws (1) and washer (2).
(6) Remove wheel chocks.
c.
Follow-on Maintenance.
(1) Connect batteries (see para 4-114).
4-346
|
