|
| |
TM 5-4210-233-14&P-1
4-100. TRANSMISSION SHIFT CONTROL-Continued
e.
Installation, Transmission Shift Control.
(1) Install end fitting (14) of cable (12) to transmission shift control (19).
(2) Install spring clip (13) in end fitting.
(3) Attach cable (12) to transmission shift control (19) using two nuts (15), lockwashers (16), screws
(17) and clamp (18).
(4) Install plate (9) on transmission shift control (1 9) with four screws (1 0) and washers (11).
(5) Insert transmission shift control (19) in console.
(6) Secure transmission shift control (19) and plate (9) to plate (6) with four screws (7) and
washers (8).
(7) Secure plate (6) to console with four screws (4) and washers (5).
(8) Secure cover (2) and gasket (3) with four screws (1).
f.
Follow-on Maintenance.
(1) Connect batteries (see para 4-114).
(2) Drive vehicle and test operation of transmission shift control.
4-345
|
