|
| |
TM 5-4210-233-14&P-1
4-71. UPPER AND LOWER COMPARTMENT DOORS-Continued
c.
Installation of Door (Inside Handle).
(1)
Lift compartment door (1) into position. Align holes in hinge (6) with holes in body.
(2)
Install and tighten screws (5).
(3)
Align clevis (4) and install pin (3) and spring clip (2).
d.
Removal of Inside Handle.
(1)
Open compartment doors (1).
(2)
Remove socket set screw (2) and remove inside handle (3) and washer (4).
e.
Installation of Inside Handle.
(1)
Open compartment door (1).
(2)
Position handle (3) and washer (4) as shown and install with socket set screw (2).
f.
Removal of Latch (Inside Handle).
(1)
Remove button (13) from inside of door.
(2)
Remove two screws (6), nuts (7) and lockwashers (8) and remove latch (9).
g. Installation of Latch (Inside Handle).
(1)
Apply sealant (Item 35, Appendix E) to mating surface of new latch.
(2)
Position latch (9) as shown and secure with screws (6), washers (8) and nuts (7).
(3)
Lubricate latch jaws with silicone grease (Item 11, Appendix E).
4-296
|
