|
| |
TM 5-4210-233-14&P-1
4-71. UPPER AND LOWER COMPARTMENT DOORS
This task covers:
a.
Removal of Door (Inside Handle)
b.
Replace Hinge (Inside Handle)
c.
Installation of Door (Inside Handle)
d.
Removal of Inside Handle
e.
Installation of Inside Handle
f.
Removal of Latch (Inside Handle)
g.
Installation of Latch (Inside Handle)
h.
Removal of Door (Outside Handle)
i.
Replace Hinge (Outside Handle)
j.
Installation of Door (Outside Handle)
k.
Removal of Outside Handle/Lock
I.
Replace Hinge (Outside Handle)
m.
Installation of Outside Handle/Lock
n.
Replace Door Seals
TOOLS REQUIRED
EQUIPMENT CONDITION
Tool Kit, General Mechanics, Automotive
Main Engine Shutdown (see para 2-12 .)
(Appendix B, Section IlI, Item 1)
APU Shutdown (see para 2-16 .)
MATERIALS/PARTS REQUIRED
Grease, Silicone (Item 11, Appendix E)
Sealant (Item 35, Appendix E)
a.
Removal of Door (Inside Handle).
(1) Support compartment door (1) and remove
spring clip (2) and clevis pin (3) from clevis
(4).
(2) Remove screws (5) securing hinge (6) to
body.
(3) Remove compartment door (1) from truck.
b.
Replace Hinge (Inside Handle).
(1) Inspect hinge for cracks, oversized
mounting holes and excessive hinge pin
movement. Replace hinge if damaged.
(2) To remove hinge, remove screws (7).
(3) Position hinge (6) on compartment door
and align holes. Install and tighten screws
(7).
(4) Lubricate hinge with silicone grease (Item
11, Appendix E).
4-295
|
