|
| |
TM 5-4210-233-14&P-1
4-46. TANK FILL AND RECIRCULATING VALVE - Continued
e.
Installation.
(1)
Carefully pull pipe (1) towards curbside and place valve (2) with two new O-rings (12) between
two flanges (3). Apply a thin coat of silicone grease (Item 11, Appendix E) to O-rings.
(2)
Secure valve (2) with eight bolts (4).
(3)
Position control rod (5) and nylon washer (6) on valve handle (7).
(4)
Install retaining pin (8) and cotter pin (9).
(5)
Install Foam Tank compartment grate (10). Secure with four screws (11).
f.
Follow-on Maintenance.
(1)
Connect batteries (see para 4-114).
4-241
|
