|
| |
TM 5-4210-233-14&P-1
4-29. RUNNING BOARDS
This task covers:
a.
Removal
c.
Follow-on Maintenance
b.
Installation
TOOLS REQUIRED
EQUIPMENT CONDITION
Tool Kit, General Mechanics, Automotive
Main Engine Shutdown (see para. 2-12.)
(Appendix B. Section III, Item 1)
APU Shutdown (see para. 2-16.1
Batteries Disconnected (see para. 4-114.)
a. Removal.
4-194
(1) Remove
either
running
board
(1)
by
removing 16 screws (2).
(2) Remove two identification plates (3) from
curb-side running board by removing four
nuts (4) and tapping on pins from back side
of plates.
b.
Installation.
(1) Install two identification plates (3) and
secure with four nuts (4).
(2) Install new Dunning board(s) (1) and secure
with 16 screws (2).
c.
Follow-on Maintenance.
(1) Connect batteries (see para. 4-114).
|
