|
| |
TM 5-4210-233-14&P-1
4-25. STREET SIDE OPERATOR'S PANEL
This task covers:
a.
Removal
c.
Follow-on Maintenance
b.
Installation
TOOLS REQUIRED
PERSONNEL REQUIRED: 2
Tool Kit, General Mechanics, Automotive
(Appendix B. Section III, Item 1)
EQUIPMENT CONDITION
Main Engine Shutdown (see para. 2-12.)
Shop Equipment, Automotive
APU Shutdown (see para. 2-16.)
Maintenance and Repair
Batteries Disconnected (see para. 4-114.)
(Appendix B. Section III, Item 4)
Drivers Side Auxiliary Suction Valves Remove
(see para. 4-52.)
Discharge Connections/Chrome Adapters
Removed (see para. 4-56.)
a.
Removal.
(1) Remove fourteen roll pins (1 ) and fourteen T-handles
(2) from operating rods (3).
(2) Remove roll pin (4) and remove front suction control
wheel (5) and washer (6) from shaft (7).
(3) Remove side suction cap.
(4) Remove snap ring (8) and pull plunger assembly (9)
from three drain valves (10).
(5) Remove six screws (11) from three drain valves (10).
4-182
|
