|
| |
TM 5-4210-233-14&P-1
Table 3-3. Operator Troubleshooting - Continued
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
ENGINE - Continued
2
ENGINE CRANKS BUT WILL NOT START
Check fuel gauge for low fuel level.
Fill fuel tank as required.
3
ENGINE IS DIFFICULT TO START
Step 1. Check battery switch set to Position 1, 2 or BOTH.
Set battery switch to Position 1, 2 or BOTH.
Step 2. Check fuel grade.
Drain and refill tank with correct fuel.
Step 3. Check for water in fuel.
Change fuel filters.
4
ENGINE STARTS THEN STOPS
Step 1. Check fuel gauge for low fuel level.
Fill tank as required.
Step 2. Check fuel grade.
Drain fuel tank and refill with correct fuel.
Step 3. Check fuel lines for crimping or leaks.
Refer to Unit Maintenance for repair.
3-18
|
