|
| |
TM 5-4210-233-14&P-1
Table 3-3. Operator Troubleshooting - Continued
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
STEERING
1
WHEEL STEERING HARD IN ONE OR BOTH DIRECTIONS
Check tire pressures.
Inflate tires to correct pressure.
2
ERRATIC STEERING OR NO STEERING AT ALL
Check steering system reservoir level.
Add power steering fluid as required.
TRANSMISSION
1
TRANSMISSION OVERHEATING
Step 1. Check if low fluid level.
Add transmission fluid as required.
Step 2. Check engine coolant level.
Add coolant as required.
Step 3. Check if gear range selected is too high.
Select lower gear.
ENGINE
1
STARTER WILL NOT CRANK MAIN ENGINE
Step 1. Check battery switch set to Position 1, 2 or BOTH.
Set battery switch to Position 1, 2 or BOTH.
Step 2. Check if ignition switch ON.
Set ignition switch to ON.
3-17
|
