 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-4210-233-14&P-1
5-22.
BLOWER REPAIR - Continued
(26)
Remove oil seal ring (37) from ring carrier (38)
on each end of rotors (35 and 36).
NOTE
All carriers are removed the same. Tighten vise
just enough to hold rotor in place.
(27)
Clamp lobe of right rotor (35) in vise with soft jaws.
(28)
Install adapter on right rotor (35).
(29)
Install puller tool to adapter with two screws. Turn puller screw (15)to remove ring carrier (38)
and inner bearing race (39) from rotors (35 and 36).
5-128
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals