Disassembly-continued -706880797

TM 5-4210-233-14&P-1

5-22.

BLOWER REPAIR - Continued

NOTE

Six puller screws must be 1/4 in.-20 x 1 -1/4 in. (32

mm) or longer.

(18)

Install three screws and align two puller tools

to rear end plate (32).

(19)

Turn both puller screws (15) evenly and

remove rear end plate (32).

(20)

Remove puller tool from rear end plate (32).

(21)

Remove two screws (29) from front end

plate (26).

(22)

Tag front end plate (26) and indicate top.

(23)

Tag front end of blower housing (34) and

indicate top.

(24)

Remove front end plate (26) by tapping with

mallet.

CAUTION

Handle rotors with care to avoid scratching surfaces.

NOTE

Tag rotors before removal.

(25)

Remove right rotor (35) and left rotor (36).

5-127