Installation -706880721

TM 5-4210-233-14&P-1

5-11. ENGINE ASSEMBLY - Continued

b. Installation.

WARNING

Keep out from under engine when installing in vehicle. If engine

slips, sways or falls, serious injury or death may result.

CAUTION

Before lifting engine completely off supports, test by lifting

slightly to see if balanced. If engine starts to tilt, lower engine

and adjust chain lengths. An unbalanced engine may swing

causing damage.

Make sure loose hoses and wires are secured and moved out of

way so they do not snag and cause damage when engine is

lifted.

(1)

Install two new rubber biscuits (1) in frame cross member.

(2) Connecting a suitable lifting device with a minimum capacity of 2 tons to the engine lift points. Lower

engine into truck through roof panel opening. Rest front mounting feet on frame cross-member. Leave

engine suspended until 24 transmission mounting bolts are installed.

5-51