ENGINE ASSEMBLY-continued -706880720

TM 5-4210-233-14&P-1

5-11. ENGINE ASSEMBLY - Continued

(37) Remove two nuts (50), plates (51), washers (52) and bolts (53). Remove and discard two rubber

biscuits (54) from frame cross member.

(38) Remove twenty-four bolts (55) and lockwashers (56) securing transmission to engine.

WARNING

Keep out from under engine when removing from vehicle. If

engine slips, sways, or falls, serious injury or death may result.

CAUTION

Make sure loose hoses and wires are secure and moved out

of way so they do not snag and cause damage when engine

is lifted.

Before lifting engine completely out of vehicle, test by lifting

slightly to see if balanced. If engine starts to tilt, lower and

adjust chain lengths. Unbalanced engine may swing causing

damage.

(39) Carefully lift engine up and out of truck through roof panel opening.

(40) Mount engine on overhaul stand.

5-50