 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-4210-233-14&P-1
4-159. STEERING COLUMN
TASK COVERS:
a.
Removal
c
Follow-on Maintenance
b.
Installation
TOOLS REOUIRED
EQUIPMENT CONDITION
Tool Kit, General Mechanics, Automotive
Main Engine Shutdown (see para 2-12 .)
(Appendix B, Section III, Item 1)
APU Shutdown (see para 2-16 .)
Batteries Disconnected (see para 4-114 .)
MATERIALS REQUIRED
Steering Wheel Removed (see para 4-158 .)
Threadlock Liquid (Item 7, Appendix E)
a. Removal.
(1) Tag and disconnect steering column wiring
harness under dash.
(2) Remove bolt (1), washer (2), and nut (3) from
bottom of steering column (4).
(3) Remove four bolts (5), four washers (6), and
four nuts (7) from steering column clamp (8).
(4) Remove clamp (8) steering column (4) and spacer (9).
(5) Slide steering column boot (10) from steering
column (4).
b. Installation.
(1) Slide steering column boot (10) onto steering
column (4).
(2) Install steering column (4) on spline shaft
beneath floor.
(3) Secure column with bolt (1), washer (2) and
nut (3). Torque bolt (1) to 35 ft lb (48 N.m).
(4) Secure column (4) to dash with steering column
spacer (9), steering column clamp (8), four
bolts (5), four washers (6) and four nuts (7).
(5) Slide boot (10) over tube on cab floor.
(6) Connect steering column wiring harness under dash.
c.
Follow-on Maintenance.
(1) Install steering wheel (see para 4-158.).
(2) Connect batteries (see para 4-114).
4-436
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals