 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-4210-233-14&P-1
4-158. STEERING WHEEL
THIS TASK COVERS:
a.
Removal
c.
Follow-on Maintenance
b.
Installation
TOOLS REQUIRED
EQUIPMENT CONDITION
Tool Kit, General Mechanics, Automotive
Main Engine Shutdown (see para 2-12 .)
(Appendix B, Section III, Item 1)
APU Shutdown (see para 2-16 .)
Batteries Disconnected (see para 4-114 .)
MATERIALS REQUIRED
Threadlock Liquid (Item 7, Appendix E)
a. Removal.
(1) Place a piece of tape on the steering wheel
ring and on instrument panel to serve as
alignment marks at installation.
(2) Remove horn button (1).
(3) Remove steering wheel nut (2).
(4) Using a suitable puller, remove steering
wheel (3) from shaft (4).
b. Installation.
(1) Position steering wheel (3) on shaft (4)
making sure the wheel is properly aligned.
(2) Apply Threadlock liquid (Item 7, Appendix E)
to steering wheel nut (2). Install nut and
torque to 70 ft lb (95 N.m).
(3) Install horn button (1).
c.
Follow-on Maintenance.
(1) Connect batteries (see para 4-114).
4-435
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals