 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-4210-233-14&P-1
4-107. FOLD-DOWN JUMP SEAT
This task covers:
a. Removal
c. Follow-on Maintenance
b Installation
TOOLS REQUIRED
EQUIPMENT CONDITION
Tool Kit, General Mechanics, Automotive
Main Engine Shutdown (see para 2-12 .)
(Appendix B, Section III, Item 1)
APU Shutdown (see para 2-16 .)
Disconnect Batteries (see para 4-114 .)
(1) Remove four screws (1), lockwashers (2)
and washers (3). Remove seat bracket (4) with
seat pad attached.
(2) Remove six screws (5) from bracket (4)
and remove seat pad (6).
(3) Remove two screws (7) and remove plate
(8) from pad (9).
(4) To remove back pad (1 0), remove two
screws (11) and bracket (12).
(5) Remove two screws (13) from cab exterior.
b. Installation.
(1) Align back pad (10) and install two screws
(13) through cab wall.
(2) Install bracket (12) with two screws (11).
(3) Attach plate (8) to pad (9) with two screws
(7).
(4) Install seat pad (6) to bracket (4) with six
screws (5).
(5) Align bracket (4) and fasten in place with
four screws (1), lockwashers (2) and
washers (3).
c.
Follow-on Maintenance.
(1) Connect batteries (see para 4-114).
4-355
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals