PASSENGER AND STATIONARY JUMP SEATS -706880483

TM 5-4210-233-14&P-1

4-106. PASSENGER AND STATIONARY JUMP SEATS

This task covers:

a. Removal

c. Follow-on Maintenance

b Installation

TOOLS REQUIRED

EQUIPMENT CONDITION

Tool Kit, General Mechanics, Automotive

Main Engine Shutdown (see para 2-12 .)

(Appendix B, Section III, Item 1)

APU Shutdown (see para 2-16 .)

Batteries Disconnected (see para 4-114 .)

a. Removal

(1) To remove seat back remove two screws (1) from air tank bracket (2).

(2) Remove air tank bracket (2).

(3) Remove four screws (3) and washers (4) and seat back (5).

(4) Remove four screws (6) and washers (7) and two seat back pads (8).

(5) To remove seat (9), lift seat from mounting posts.

b. Installation.

(1) Align seat (9) over posts and press in place.

(2) Install two seat back pads (8) on seat back (5) with four screws (6) and washers (7).

(3) Align seat back (5), and fasten in place with four screws (3) and washers (4).

(4) Install air tank bracket (2), and fasten to seat back (5) with two screws (1).

Follow-on Maintenance.

(1) Connect batteries (see para 4-114).

4-354