 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-4210-233-14&P-1
4-46. TANK FILL AND RECIRCULATING VALVE - Continued
(4) Remove control rod (5) and nylon washer (6).
(5) Remove eight bolts (7).
(6) Remove valve (8) from between flanges (9).
(7) Remove and discard two O-rings (10).
b. Disassembly.
(1) Use spanner wrench to turn seal retainer (1) counterclockwise until free from valve body (2).
(2) Remove and discard retainer and O-ring (3).
(3) Remove and discard seat (4).
(4) Remove and discard seat O-ring (5).
(5) Remove capscrew (6) and handle washer (7).
(6) Mark position of handle (8).
(7) Remove handle (8) and handle O-ring (9). Discard O-ring (9).
(8) Mark position of stop plates (10).
(9) Remove two stop plates (10).
(10) Remove pivot bolt (11) and pivot bolt O-ring (12). Discard pivot bolt O-ring (12).
(11) Remove ball valve (13).
(12) Remove actuator shaft (14) and O-ring (15). Discard O-ring.
4-239
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals