Table 4-1. Unit PMCS-continued -706880145

TM 5-4210-233-14&P-1

Table 4-1. Unit PMCS-Continued

Item

Interval

No. W M

ITEM TO BE INSPECTED/Procedures

STEERING ASSEMBLY - Continued

Steering Arm Drag Link

Inspect steering arm and drag link for any scoring, corrosion, bends, or

other damage. Carry out operational test to ensure steering geometry.

SUSPENSION SYSTEM

U-Bolts, Leaf Springs

Inspect visually for major damage. Replace as required (see para 4-163).

FRONT AXLE ASSEMBLY

Front Axle Assembly

Inspect visually for major damage. Report any damage to Direct Support.

Tie Rod Ends

Inspect tie rod end seals for indication of damage and ensure seals are

properly seated. Inspect tie rod for bends or serious dents. When wheels

are turned, the tie rod should move smoothly. Report any deficiencies to

Direct Support.

REAR AXLE ASSEMBLY

Rear Axle Assembly

Check for signs of oil leakage. Check vent lines are firmly attached and vent

is open.

AERIAL LADDER/WATER TOWER ASSEMBLY

Hydraulic Oil Tank

Check for signs of hydraulic oil leakage. Report any leaks to Direct Support.

Outrigger Beams

Inspect visually for signs of damage, scoring, cracks, or broken welds.

Report any deficiencies to Direct Support.

Outrigger Extend/Retract Cylinders, Outrigger Jack Cylinders

Check for hydraulic oil leakage. Report any leaks to Direct Support.

4-16