|
| |
TURCK SERVICE MANUAL
TM 5-4210-230-14&P-1
FUEL SYSTEM
FUEL PUMP SPECIFICATIONS
Engine
Model
Type
Drive
Fuel Delivery
Capacity
Fuel Delivery
Pressure
Pump to Engine
Speed Ratio
4-152,4-152E
Angular lever
24.3 gal. Per
*4 to 5-1/2 psi
1/2
4-196,4-196E
and cam
hr. up to 4000
rpm
Angular lever
20-1/2 gal. per
*3-1/2 to
1/2
BG-241,241E
and cam
hr. up to 3500
4-1/2 psi
BG-265,265E
rpm
BD-282
Angular lever
20-1/2 gal. Per
3 to 4-1/2 psi
*1/2
BD-308
and cam
hr.
up to 3500
rpm
RD-372,RD-406
Angular lever
20 gal. per hr.
*3-1/2 to
1/2
RD-450,RD-501
and cam
up to 3500 rpm
5-1/2 psi
6-232,6-258
Angular lever
27 gal. per hr.
*4 to 5-1/2 psi
1/2
and cam
up to 4000 rpm
V-266,266E
Angular lever
27 gal. per hr.
*4-1/2 to
1/2
V-304,304E
and cam
up to 4000 rpm
5-3/4 psi
V-345,345E
V-392,392E
V-VS-401
Angular lever
30 gal. per hr.
*4-1/2 to
1/2
V-VS-478
and cam
up to 4000 rpm
5-3/4 psi
V-VS- 549
V-VS-401
Electric In-Tank
NA
3 to 5 psi
Not Applicable
V-VS-478
Mounting
V-VS- 549
D-354
Angular lever
18 gal. per hr.
5 to 8 psi
1/2
and cam
at 3000 rpm
DV-462,DV-462B
Electric In-Tank
NA
3 to 5 psi
Not Applicable
DV-550,DV-550B
Mounting
DVT-573
*NOTE: Pressures shown are those obtained on test equipment. Under operating conditions these readings may be
lower depending on condition of carburetor, etc. Fuel pressure test must be taken at carburetor inlet height. The
lower limit reading is obtained at open throttle and high limit reading at idle.
CTS-2050-K
Page 2
PRINTED IN UNITED STATES OF AMERICA
|
