|
| |
TRUCK SERVICE MANUAL
TM 5-4210-230-14&P-1
BODIES AND CABS
Fig. 53. Cab Front Mounting Bracket (Left Front View)
Legend for Figure 53
Key
Description
1
Sill, Cab Underbody
2
Bolt, Intermediate Bracket
3
Bracket, Intermediate
4
Washer, Flat
5
Insulator, Water Type
6
Sidemember, Frame
7
Insulator, Donut Type
8
Bolt and Nut (Cab Mounting)
9
Bracket, Cab Front Mounting
10
Bushing
11
Bolt, Nut and Washer
12
Reinforcement
CAB MOUNTING
A four point rubber cushioned mounting is used for
securing cab to frame. This mounting has been designed to
give a firm foundation to cab and at the same time provide
enough flexibility in mounting to prevent severe road shock
from being transferred from frame to cab. The hard rubber
insulators used are maintenance free.
Fig. 54. Cab Rear Mounting (200 cm 80 Inch Wide Cab)
Legend for Figure 54
Key
Description
1
Plug, Button
2
Bolt, Cab Mounting
3
Sill, Cab Underbody
4
Bracket, Transmission Mounting
5
Crossmember, Cab Rear Mounting
6
Nut, Flange Type
7
Insulator, Lower
8
Bracket, Cab Rear Mounting
9
Bolt, Flange Head
10
Insulator, Upper
Cab Front Mounting
Both 200 and 230 cm (80 and 90 Inch) wide cabs use a
cab front mounting that is similar to that shown in Fig. 53.
Cab width mounting differences are accommodated by using
different mounting holes in the intermediate mounting bracket.
CTS-2714R Page 29
PRINTED IN UNITED STATES OF AMERICA
|
