|
| |
TM5-4210-229-14&P
6-15.
TRANSMISSION REPAIR (continued).
NOTE
Trimmer valve cover (113) is spring
loaded and must be restrained while the
bolts (114) are being removed.
(h)
Remove eight bolts (114) from trimmer valve
cover (113).
(i)
Remove trimmer valve cover (113). Remove
valve stops (115, 116, 117 and 118).
(j)
Remove springs (119, 120, 121, 122, 123,
124, 125 and 126). Remove trimmer plugs
(127, 128, 129, and 130). Remove trimmer
valves (131,132,133, and 134).
(k)
Remove trim accumulator valve (135), spring
(136), and stop (137).
NOTE
Valve stop (138) and spacer (139) are
spring loaded and must be restrained
while pins (140) are being removed.
(l)
Remove two retainer pins (140) from the
control valve body (112).
(m) Remove valve stop (138) and machined
spacer (139).
(n)
Remove relay valve springs (141 and 142).
Remove relay valve (143 and 144).
NOTE
Record location of the adjusting ring (99)
in relation to retaining pin (94) before
removal.
(o)
Depress adjusting ring (99). Remove pin (94),
ring (99), washer (145), valve stop (146)
spring (147) and valve (148).
(p)
Remove selector valve.
(q)
Compress adjusting rings (100, 101, and
102), and remove retainer pins (95, 96, and
97). Remove the adjusting rings.
(r)
Remove valve stops (150, 151 and 152).
Remove spring (153, 154 and 155). Remove
modulator valves (156, 157 and 158).
Remove shift valves (159, 160 and 161).
(s)
Compress relay valve stop (162), and remove
retainer pin (108).
(t)
Remove valve stop (162), valve spring (163),
and relay valve (164).
(u)
Depress trimmer regulator valve stop (165)
and remove retainer pin (166).
(v)
Remove valve stop (165), spring (167), and
valve (168).
(2)
Assembly.
(a)
Install valve (148) into its bore in valve body
(112).
(b)
Install spring (147), valve stop (146) (drilled
end last), washer (145) and adjusting ring
(99) into the bore.
(c)
Depress the adjusting ring (99) against spring
pressure and install pin (94). Install pin
through the hole in body (112)and valve stop
(146).
(d)
Install valve (159), shorter land first, into
valve body (112).
(e)
Into the same bore, install valve (156) smaller
end first. Install spring (153), valve stop
(150) and adjusting ring (100).
(q)
Depress ring (100) against spring pressure
and install pin (95) so that it passes through
valve stop (150) and retains ring (100).
6-59
|
