|
| |
TM5-4210-229-14&P
4-183. POWER STEERING PUMP REPLACEMENT.
This task covers:
a. Removal
b. Installation
INITIAL SETUP
Tools
General Mechanics Tool Kit
Suction Pump
Equipment Condition
Para. Condition Description
4-62
Belts Removed
Materials/Parts
Power Steering Pump (491159C92)
Power Steering Fluid (Appendix D, Item 19)
REMOVAL
a.
Remove filler cap.
b.
Remove fluid from reservoir with a suction pump.
c.
Disconnect all lines from pump.
d.
Remove three nuts (1) and lockwashers (2).
e.
Remove rear bracket (3) by removing two nuts (4).
f.
Remove spacer (5) and washer (6).
g.
Slide pump (7) toward rear of truck and remove
from front bracket (8).
INSTALLATION
a.
Position pump (7) at front bracket (8) and
install
loosely,
two
nuts
(1)
and
lockwashers (2).
b.
Install spacer (5) and washer (6).
c.
Install rear bracket (3) using two nuts (4).
d.
Install third nut (1) and lockwasher (2)
loosely.
e.
Install belts (paragraph 4-62) and slide
pump to
take up slack on belts.
f.
While keeping tension on belts, tighten
three nuts
(1).
g.
Connect all fluid lines to pump.
h.
Refill steering reservoir with power steering fluid
(Appendix D, Item 19) (paragraph 4- 180).
4-198
|
