|
| |
TM5-4210-229-14&P
4-97. CAB SPOTLIGHT MAINTENANCE
This task covers:
a. Removal
b. Repair
c. Installation
INITIAL SET-UP
Tools
General Mechanics Tool Kit
Materials/Parts
Spotlight (S-6-225)
General Safety Instructions
Engine OFF.
Transmission in (N) neutral.
Parking brake set.
Batteries disconnected.
REMOVAL
a.
Remove two screws (1) from end of cap (2)
Inside cab.
b.
Remove end cap (2).
c.
Disconnect wiring.
d.
Remove screw attaching lamp assembly to the
inside of windshield post.
e.
Remove screw (3), nut (4), and brace (5) from
spotlight.
f.
Remove two screws securing spotlight assem-
bly
to outside of windshield
g.
Remove spotlight assembly.
h.
Remove screw (6) from bottom ring (7).
i.
Remove retaining ring (7).
j.
Remove lamp (8) from housing (9)
REPAIR
Repair consists of replacing defective lamp (8) or retaining
ring (7).
INSTALLATION
a.
Insert lamp (8) and wiring into housing (9).
b.
Install retaining ring (7) on housing (9) and
secure with screw (6).
c.
Position outer spotlight assembly to cab
windshield post and secure with two screws.
d.
Install brace (5) to spotlight with screw (3) and
nut (4).
e.
Secure inner spotlight assembly to windshield
post with screw.
f.
Connect wiring to handle.
g.
Install end cap (2) and secure with two screws
(1).
h.
Reconnect battery cables.
4-110
|
