|
| |
TM5-4210-229-14&P
4-75. INJECTION LINES REPLACEMENT (Continued).
c.
Hold the injection pump delivery valve holder (4)
with a wrench to prevent movement and loosen
line nuts (5) at the injection pump (6).
d.
Remove the lines from the pump.
INSTALLATION
a.
Holding the injection pump delivery valve holder
(4) with a wrench to prevent movement, install the
injection lines and torque the line nuts (5) to the
pump (6). Torque line nuts to 30 ft-lb (41 N.m).
b.
Remove the protective caps from the injection
nozzles and install the lines and nuts (2) to the
nozzles (3). Torque line nuts to 30 ft-lb (41 N.m).
c.
Install the line clamps (1) if removed.
4-76. FUEL INJECTION PUMP REPLACEMENT.
This task covers:
a.
Removal
b. Installation
Tools
General Safety Instructions
General Mechanics Tool Kit
Engine OFF.
Transmission in (N) neutral.
Parking brake set.
Batteries disconnected.
Materials/Parts
Injection Pump (1802604C92)
Gasket (675 609 C1)
Equipment Condition
Para. Condition Description
4-75 Injection Lines Removed
4-87
|
