|
| |
TM5-4210-229014&P
4-73. ACCELERATOR PEDAL REPLACEMENT.
This task covers:
a.
Removal
b. Installation
INITIAL SET-UP
Tools
General Safety Instructions
General Mechanics Tool Kit
Engine OFF.
Transmission in (N) neutral.
Parking brake set.
Materials/Parts
Accelerator Pedal (482606C1)
REMOVAL
a.
Squeeze grommet (1) together with pliers. Remove
grommet (1) from accelerator pedal rod (2).
b.
Slide cable (3) through hole in accelerator pedal
rod (2).
c.
Remove nut (4) from sleeve (5) on lower cable (6)
and slide lower cable (6) out of rod (2).
d.
Remove snap ring (7) and slide accelerator pedal
assembly off pivot shaft (8).
e.
Remove two nuts (9), lockwashers (10), and bolts
(11) and remove accelerator pedal (12) from rod.
INSTALLATION
a.
Install accelerator pedal (12) onto rod (2) and se-
cure with two bolts (11), lockwashers (10), and
nuts (9).
b.
Slide accelerator pedal assembly onto pivot shaft
(8) and install snap ring (7).
c.
Install lower cable (6) through sleeve (5) and rod
(2) and secure with nut (4).
d.
Slide cable (3) through hole in accelerator pedal
rod (2).
e.
Install grommet (1).
4-85
|
