|
| |
TM5-4210-229-14&P
4-72. FUEL TANK REPLACEMENT (Continued).
REMOVAL
a.
Disconnect two electrical contacts at fuel level in-
dicator sending unit (1).
b.
Remove five bolts (2) from the sending unit (1) and
remove the gasket (3) and sending unit (1).
c.
Remove nut (4) from each retainer strap (5).
d.
Remove four nuts (6), washers (7) and bolts (8)
and remove step (9).
e.
Place a jack or other suitable support under tank
(10) and remove four nuts (11), washers (12), and
bolts (13) from each bracket (14).
f.
Remove brackets (14). Lower tank (10) and re-
move.
INSTALLATION
a.
Slide tank (10) into place and install brackets (14).
b.
Secure each bracket (14) using four bolts (13),
washers (12), and nuts (11).
c.
Install step (9), and secure with four bolts (8),
washers (7), and nuts (6).
d.
Install retainer straps (5) and secure with nuts (4).
e.
Position gasket (3) and sending unit (1) and install
the five bolts (2) that secure the sending unit (1) to
the tank (10).
f.
Connect two electrical contacts at fuel level indi-
cator sending unit (1).
g.
Install fuel lines (paragraph 4-71).
h.
Connect batteries.
4-84
|
