|
| |
TM5-4210-229-14&P
4-37. HOSE REEL ASSEMBLY MAINTENANCE (Continued).
REMOVAL
a.
Remove nuts (1) and lockwashers (2) securing
control wiring (3) to solenoid (4).
b.
Remove curbside hose (5) from inlet elbow (6).
c.
Disconnect streetside hose (7) from swivel joint (8).
d.
Remove three nuts (9), lockwashers (10), and bolts
(11) securing rear control panel (12) to hose reel
(13).
e.
Remove four nuts (14), lockwashers (15) and bolts
(16) securing hose reel assembly to fire- fighting
system frame (17).
When lifting an object, make sure the hoist
and sling are fastened securely. Be sure
the item being lifted does not exceed the
capacity of the lifting device.
f.
Using the hoist and sling, remove the hose reel
assembly (13).
INSTALLATION
When lifting an object, make sure the hoist
and sling are fastened securely. Be sure
the item being lifted does not exceed the
capacity of the lifting device.
a.
Using the hoist and sling, lift the hose reel (13) and
position on the firefighting system frame (17).
4-52
|
